TDS5000B Online Programmer Guide
-- 1 2 9 --
CH<x>:PRObe:RESistance?
Description
This query--only command returns the resistance factor of the probe
that is attached to the specified channel. The channel is specified by x.
The value of x can range from 1 through 4 for four--channel instruments
or 1 through 2 for two--channel instruments.
Group
Vertical
Syntax
CH<x>:PRObe:RESistance?
Example
CH2:PRObe:RESistance?
This query might return
:CH2:PROBE:RESISTANCE 10.0000E+06
indicating that the input resistance of the probe attached to Channel 2 is
10.0 MÙ.
To Next Page
Loading...
