Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 7 1 9 --
TRIGger:A:PULse:RUNT:POLarity
Description
This command sets or queries the polarity for the A pulse runt trigger.
This command is equivalent to selecting Runt Setup from the Trig
menu and then choosing the Polarity setting.
Group
Trigger
Related Commands
TRIGger:A:PULse:RUNT:THReshold?
Syntax 1
TRIGger:A:PULse:RUNT:POLarity {POSITIVe|NEG-
Ative}
Syntax 2
TRIGger:A:PULse:RUNT:POLarity?
Arguments
H POSitive
This indicates that the rising edge crosses the low threshold and the
falling edge re--crosses the low threshold without either edge ever
crossing the high threshold.
H NEGative
This indicates that the falling edge crosses the high threshold and the
rising edge re--crosses the high threshold without either edge ever
crossing the low threshold.
Example 1
TRIGger:A:PULse:RUNT:POLarity?
This query might return
:TRIGGER:A:PULSE:RUNT:POLARITY POSITIVE
indicating that the polarity of the A pulse runt trigger is positive.
Example 2
TRIGger:A:PULse:RUNT:POLarity NEGATIVE
This command specifies that the polarity of the A pulse runt trigger is
negative.