Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 4 1 7 --
MASK:AUTOSet:TRIGger
Description
This command controls if a MASK:AUTOSet affects the trigger level.
Other trigger settings such as type of trigger are not changed by
MASK:AUTOSet. The default is ON.
This command, like all the MASK:AUTOSET commands, affects only
an autoset on a standard mask, not the general oscilloscope autoset
function.
Group
Mask
Syntax
MASK:AUTOSet:TRIGger {ON|OFF|<NR1>}
Arguments
H ON
This enables the autoset:hpos function.
H OFF
This disables the autoset:hpos function.
H <NR1>
A 0 disables the autoset:trigger function; any other value enables it.
Example
MASK:AUTOSet:HPOS ON
Enables the autoset:hpos function

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English