Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 6 1 0 --
MEASUrement:REFLevel:PERCent:MID2
Description
This command sets or queries the percent (where 100% is equal to
HIGH) that is used to calculate the mid reference level for the second
waveform specified when MEASUrement:REFLevel:METHod is set to
Percent. This command affects the results of delay measurements and is
equivalent to selecting Reference Levels from the Measure menu, and
then entering the Percentage Mid2 Ref value.
Note: this command affects the associated reference level parameter
for all MEASurements:IMMed and the eight periodic measurements.
To change the parameter for individual measurements, use the MEA-
SUrement:MEAS<x>:REFLevel commands.
Group
Measurement
Related Commands
MEASUrement:REFLevel:METHod
Syntax 1
MEASUrement:REFLevel:PERCent:MID2 <NR3>
Syntax 2
MEASUrement:REFLevel:PERCent:MID2?
Argument
H <NR3>
This is the mid reference level, ranging from 0 to 100%. The default
mid reference level is 50%.
Example 1
MEASUrement:REFLevel:PERCent:MID2 40
This command sets the mid2 reference level to 40% of HIGH.
Example 2
MEASUrement:REFLevel:PERCent:MID2?
This query might return
:MEASUREMENT:REFLEVEL:PERCENT:MID2 45
indicating that the percentage mid2 reference level is set to 45% of
HIGH.

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English