TDS5000B Online Programmer Guide
-- 5 0 8 --
MATH<x>:SPECTral:GATEWIDTH
Description
This command sets or returns the gate width input, in seconds, to the
spectral analyzer for the specified math waveform. The math waveform
is specified by x, which ranges from 1 through 4 for four--channel in-
struments or 1 through 2 for two --channel instruments. This command
is equivalent to selecting Spectral Setup from the Math menu and enter-
ing a duration value in the Gate Dur box.
Group
Math
Related Commands
MATH<x>:SPECTral:GATEPOS
Syntax 1
MATH<x>:SPECTral:GATEWIDTH <NR3>
Syntax 2
MATH<x>:SPECTral:GATEWIDTH?
Argument
H <NR3>
This is the time across the 10 --division screen in seconds.
Example 1
MATH1:SPECTral:GATEWIDTH 1.0E-3
This command sets the gate width input to the spectral analyzer at 1 ms.
Example 2
MATH3:SPECTral:GATEWIDTH?
This query might return
:MATH3:SPECTRAL:GATEWIDTH 1.0000E-03
indicating that the gate width to the spectral analyzer is set to 1 ms.
To Next Page
Loading...
Need help?
General
