Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 6 9 4 --
TRIGger:A:LOGIc:SETHold:CLOCk?
Description
This query--only command returns the clock edge polarity, voltage
threshold and source input for setup and hold triggering. This command
is equivalent to selecting Setup/Hold Setup from the Trig menu and
then viewing the current clock setups.
Group
Trigger
Related Commands
TRIGger:A:LOGIc:SETHold:DATa?,
TRIGger:A:LOGIc:SETHold:CLOCk:EDGE,
TRIGger:A:LOGIc:SETHold:CLOCk:THReshold,
TRIGger:A:LOGIc:SETHold:CLOCk:SOUrce
Syntax
TRIGger:A:LOGIc:SETHold:CLOCk?
Example
TRIGger:A:LOGIc:SETHold:CLOCk?
This query might return
:TRIGGER:A:
LOGIc:SETHold:CLOCk:EDGE RISE;
THRESHOLD 1.4000;SOURCE CH2
indicating the current clock settings for setup and hold triggering.