Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 7 9 5 --
WFMInpre:BIT_Nr
Description
This command sets or returns the number of bits per binary waveform
point for the waveform, as specified by the DATa:DESTination com-
mand. This specification is only meaningful when WFMInpre:ENCdg
is set to BIN.
Group
Waveform Transfer
Related Commands
DATa:DESTination, WFMInpre:ENCdg, WFMInpre:BYT_Nr,
WFMOutpre:BIT_Nr
Syntax 1
WFMInpre:BIT_Nr <NR1>
Syntax 2
WFMInpre:BIT_Nr?
Argument
H <NR1>
This number of bits per data point can be 8, 16 ( RI, RP) or 32 (FP).
Example 1
WFMInpre:BIT_Nr?
This query might return
:WFMINPRE:BIT_NR 8
indicating that incoming RI or RP binary format data uses 8 bits per
waveform point.
Example 2
WFMInpre:BIT_Nr 16
This command sets the number of bits per waveform point to 16, for
incoming RI and RP binary format data.

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English