Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 7 1 6 --
TRIgger:A:PULse:RUNT:LOGIc:INPUT?
Description
This query--only command returns the current A runt pulse trigger logic
input parameters. This query is equivalent to selecting Runt Setup from
the Trig menu and then viewing the current settings.
Note: This command is not available in two--channel instruments.
Group
Trigger
Syntax
TRIGger:A:PULse:RUNT:LOGIcINPUT?
Example
TRIGger:A:PULse:RUNT:LOGIc:INPUt?
This query might return these parameters:
:TRIGGER:A:PULSE:RUNT:LOGIC:INPUT:CH1 HIGH;
CH2 X; CH3 X; CH4 LOW.