TDS5000B Online Programmer Guide
-- 7 7 --
*WAI
Description
The *WAI (Wait) command (no query form) prevents the instrument
from executing further commands or queries until all pending com-
mands that generate an OPC message are complete. This command al-
lows you to synchronize the operation of the instrument with your ap-
plication program. For more information, refer to Synchronization
Methods.
Group
Status and Error
Related Commands
BUSY?, *OPC
Syntax
*WAI
Example
*WAI
This command prevents the instrument from executing any further
commands or queries until all pending commands that generate an OPC
message are complete.
To Next Page
Loading...
Need help?
General
