To Next Page

To Previous Page

TDS5000B Online Programmer Guide

-- 6 3 9 --

SELect:<wfm>

Description

This command turns on the display of a specified waveform and also

resets the acquisition. The query returns whether the channel is on or

off but does not indicate whether it is the selected waveform.

Group

Vertical

Syntax 1

SELect:<wfm> {ON|OFF|<NR1>}

Syntax 2

SELect:<wfm>?

Arguments

H ON

This turns on the display of the specified waveform. This waveform

also becomes the selected waveform.

H OFF

This turns off the display of the specified waveform.

H <NR1>

A 0 turns off the display of the specified waveform; any other value

turns on the display of the specified waveform.

Example

SELect:CH2 ON

This command turns the channel 2 waveform display on, and selects

channel 2.

SELect:REF1?

This query might return

:SELECT:REF1

indicating that REF1 is the selected waveform.

Tektronix TDS5000B Series Online Programmer Guide

Other manuals for Tektronix TDS5000B Series