Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 8 1 7 --
WFMOutpre:BYT_Or
Description
This command sets or queries which byte of binary waveform data is
transmitted first, during a waveform data transfer, when data points
require more than one byte. This specification only has meaning when
WFMOutpre:ENCdg is set to BIN.
Group
Waveform Transfer
Related Commands
WFMOutpre:ENCdg
Syntax 1
WFMOutpre:BYT_Or {LSB|MSB}
Syntax 2
WFMOutpre:BYT_Or?
Arguments
H LSB
This specifies that the least significant byte will be transmitted first.
H MSB
This specifies that the most significant byte will be transmitted first.
Example 1
WFMOutpre:BYT_Or?
This query might return
:WFMOUTPRE:BYT_OR LSB
indicating that the least significant data byte will be transmitted first.
Example 2
WFMOutpre:BYT_Or MSB
This command sets the most significant outgoing byte of waveform
data to be transmitted first.