Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 7 0 8 --
TRIGger:A:MODe
Description
This command sets or queries the A trigger mode. This command is
equivalent to selecting Mode from the Trig menu and then choosing the
desired Trigger Mode.
Group
Trigger
Related Commands
TRIGger:A:LEVel
Syntax 1
TRIGger:A:MODe {AUTO|NORMal}
Syntax 2
TRIGger:A:MODe?
Arguments
H AUTO
This generates a trigger if one is not detected within a specified time
period.
H NORMal
This waits for a valid trigger event.
Example 1
TRIGger:A:MODe?
This query might return
:TRIGGER:A:MODE NORMAL
indicating that a valid trigger event must occur before a trigger is gener-
ated.
Example 2
TRIGger:A:MODe NORMAL
This command specifies that a valid trigger event must occur before a
trigger is generated.