Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 4 0 3 --
MASK:AUTOAdjust:VDELTA
Description
This command sets or returns how far autofit searches vertically.
Autofit moves the waveform vertically and/or horizontally to reduce the
number of hits within a given mask. If infinite or variable persistence is
enabled, these movements will clear any persisted data. If Autofit
makes frequent adjustments, there can be very little or even no per-
sisted data displayed.
Group
Mask
Syntax 1
MASK:AUTOAdjust:VDELTA {<NR3>}
Syntax 2
MASK:AUTOAdjust:VDELTA?
Argument
H <NR3>
Is a floating point number which represents a percent of a division.
Example
MASK:AUTOAdjust:VDELTA 0.6
Sets the vertical autofit search to 0.6 of a division.