TDS5000B Online Programmer Guide
-- 6 1 6 --
NEWpass
Description
This command (no query form) changes the password that enables ac-
cess to password protected data. The PASSWord command must be
successfully executed before using this command or an execution error
will be generated.
Group
Miscellaneous
Related Commands
PASSWord, *PUD
Syntax
NEWpass <QString>
Argument
H <Qstring>
This is the new password, which can contain up to 10 characters.
Example
NEWpass ”mypassword”
This command creates a new password (mypassword) for accessing
your protected data.
To Next Page
Loading...
