Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 7 8 0 --
TRIGger:B:EDGE:COUPling
Description
This command sets or queries the type of coupling for the B trigger.
This command is equivalent to selecting B Event (Delayed) Trigger
Setup from the Trig menu and choosing the setting from the Coupling
drop--down list.
Group
Trigger
Related Commands
TRIGger:B:EDGE?
Syntax 1
TRIGger:B:EDGE:COUPling {DC|ATRIGger|NOISErej}
Syntax 2
TRIGger:B:EDGE:COUPling?
Arguments
H ATRIGger
This sets the B trigger coupling to match the setting on the A trigger.
H DC
This selects DC trigger coupling.
H NOISErej
This selects DC low sensitivity.
Example 1
TRIGger:B:EDGE:COUPling?
This query might return
:TRIGGER:B:EDGE:COUPLING ATRIGGER
for the B trigger coupling.
Example 2
TRIGger:B:EDGE:COUPling DC
This command selects DC for the B trigger coupling.