TDS5000B Online Programmer Guide
-- 5 7 1 --
MEASUrement:MEAS<x>:DELay?
Description
This query--only command returns the delay measurement parameters
for the measurement specified by <x>, which ranges from 1 through 8.
Measurement parameters are presented in the following order: Edge1,
Edge2, and Direction. This query command is equivalent to selecting
Time from the Measure menu, choosing Delay and viewing the Delay
Edge and Search Direction settings.
Group
Measurement
Syntax 1
MEASUrement:MEAS<x>:DELay?
Example
MEASUrement:MEAS3?
This query might return
:MEASUREMENT:MEAS3:DELAY:EDGE1 RISE;
EDGE2 RISE;DIRECTION FORWARDS.
To Next Page
Loading...
