TDS5000B Online Programmer Guide
-- 6 2 1 --
RECAll:WAVEform
Description
This command (no query form) recalls a stored waveform to a refer-
ence location. This command is equivalent to selecting Recall from the
File menu, and then pressing the Waveform button.
Group
Save and Recall
Related Commands
DELEte:WAVEform, SAVe_WAVEform
Syntax
RECAll:WAVEform {<file path>,REF<x>}
Arguments
H REF<x>
The instrument will recall the waveform from this location in internal
reference memory. Reference memory location values range from 1
through 4.
H <file path>
The instrument will recall the setup from the <file path> location:
<file path> is a quoted string that defines the file name and path. Input
the file path using the form <drive>:<dir>/<filename>.<drive> and
one or more <dir>s are optional. If you do not specify them, the in-
strument will read the waveform from the default directory (C:\Tek-
Scope|Waveforms). <filename> stands for a filename of up to 128
characters (use of wildcard characters in filenames is not supported).
Filename extensions are not required but are highly recommended.
Example
RECAll:WAVEform ”TEK00000.WFM”,REF1
This command recalls the waveform stored in the file named
TEK00000.WFM from the default directory for waveforms (C:\Tek-
Scope\Waveforms) to the reference location 1.
To Next Page
Loading...
Need help?
General
