Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 8 0 7 --
WFMInpre:XUNit
Description
This command sets or returns the horizontal units of the incoming wa-
veform.
Group
Waveform Transfer
Related Commands
WFMOutpre:XUNit
Syntax 1
WFMInpre:XUNit <String>
Syntax 2
WFMInpre:XUNit?
Argument
H <String>
This contains a maximum of three alpha characters that represent the
horizontal unit of measure for the incoming waveform.
Example 1
WFMInpre:XUNit?
This query might return
:WFMINPRE:XUNIT ”s”
indicating that the horizontal units for the incoming waveform are sec-
onds.
Example 2
WFMInpre:XUNit ”Hz”
This command specifies that the horizontal units for the incoming wa-
veform are hertz.