TDS5000B Online Programmer Guide
-- 5 0 1 --
MATH<x>:LABel:NAMe
Description
This command sets or returns the label string, which is used for anno-
tating the math waveform on the screen. The math waveform to which
the label is attached is specified by x, which ranges in value from 1
through 4 for four--channel instruments or 1 through 2 for two--channel
instruments. This command is equivalent to selecting Math Setup from
the Math menu and entering a label in the Label box.
Group
Math
Syntax 1
MATH<x>:LABel:NAMe <string>
Syntax 2
MATH<x>:LABel:NAMe?
Argument
H <string>
This specifies the label to annotate the math waveform.
Example 1
MATH2:LABel:NAMe ”Probe point7”
This command assigns ”Probe point7” Math 2.
Example 2
MATH2:LABel:NAMe?
This query might return
:MATH2:LABEL:NAME ”Probe point7”
indicating that Probe point 7 is the label for Math 2.
To Next Page
Loading...
