Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 2 7 --
Horizontal Command Group
Horizontal commands control the time bases of the instrument. You can
set the time per division (or time per point) of the main time base. You
• can use the Horizontal commands to do the following:
H Set the scale, horizontal position and reference, and units of the
time base
H Get the screen resolution, time of first point and time of last point,
or get all the horizontal settings
H Enable or disable the display of the time base
You may substitute SECdiv for SCAle in the horizontal commands.
This provides program compatibility with earlier models of Tektronix
instruments.
Command Description
HORizontal:DIVisions? Returns the number of graticule di-
visions over which the waveform is
displayed
HORizontal:FASTframe:COUNt Sets or returns FastFrame frame
count
HORizontal:FASTframe:LENgth Sets or returns the horizontal record
length to the number of sample
points per frame
HORizontal:FASTframe:
MULtipleframes:FRAMESTart:
<wfm>
Sets or returns the start frame num-
ber on the specified waveform for
the FastFrames’ multiple frames
feature
HORizontal:FASTframe:
MULtipleframes:MODe
Sets or returns the multiple frames
mode for the FastFrames’ multiple
frames feature
HORizontal:FASTframe:
MULtipleframes:NUMFRames:
<wfm>
Sets or returns the number of
frames on the specified waveform
for the FastFrames’ multiple frames
feature
HORizontal:FASTframe:REF:FRAMe Sets or returns the FastFrame ref-
erence frame number
HORizontal:FASTframe:REF:SOUrce Sets or returns the FastFrame ref-
erence waveform source
HORizontal:FASTframe:SELECTED:
<wfm>
Sets or returns the FastFrame se-
lected frame number on the speci-
fied waveform
HORizontal:FASTframe:STATE Sets or returns the state of the
FastFrame acquisition
HORizontal:FASTframe:SUMFrame This command sets or queries the
summary frame mode.
HORizontal:FASTframe:TIMEStamp:
ALL:<wfm>?
Returns the frame number and time
stamp for each frame between re-
quested frames within the specified
waveform
HORizontal:FASTframe:TIMEStamp:
BETWeen:<wfm>?
Returns the relative trigger for the
delta time between the specified
frames

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English