Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 3 7 6 --
HORizontal:SCAle
Description
This command sets or queries the time per division for the time base
and is identical to the HORizontal:MAIn:SCAle command. It is pro-
vided to maintain program compatibility with some older models of
Tektronix instruments. This command is equivalent to selecting Posi-
tion/Scale from the Horiz/Acq menu and entering the desired Scale val-
ue.
Group
Horizontal
Related Commands
HORizontal:MAIn:SCAle
Syntax 1
HORizontal:SCAle <NR3>
Syntax 2
HORizontal:SCAle?
Argument
H <NR3>
This is the time per division. The range is from 200 ps to 40 s.
Example 1
HORizontal:SCAle 2E-6
This command sets the main scale to 2 µs per division.
Example 2
HORizontal:SCAle?
This query might return
:HORIZONTAL:SCALE 2.0000E-06
This indicates that the time per division is currently set to 2 µs.

Tektronix TDS5000B Series Specifications

General

Channels	2 or 4
Vertical Resolution	8 bits
Display Type	Color LCD
Vertical Sensitivity	1 mV/div to 10 V/div
Input Coupling	AC, DC, GND
Timebase Accuracy	± 50 ppm
Operating Temperature	0 °C to +50 °C
Bandwidth	up to 1 GHz
Sample Rate	up to 5 GS/s
Display Size	10.4 inches
Input Impedance	1 MΩ ± 1%
Trigger Types	Edge, Pulse Width, Logic, Runt, Timeout, Setup/Hold
Maximum Input Voltage	300 V (DC + peak AC)
Interface	USB, GPIB, Ethernet