Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 1 5 3 --
CURSor:VBArs:DELTa?
Description
This query--only command returns the horizontal difference between
the two vertical bar cursors. The units are specified by the CUR-
Sor:VBArs:UNIts command. The position can appear in units of Base
or 1/Base.
Group
Cursor
Related Commands
CURSor:VBArs:UNIts
Syntax
CURSor:VBArs:DELTa?
Returns
A floating point value with an exponent.
Example
CURSor:VBArs:DELTa?
This command might return
:CURSOR:VBARS:DELTA 1.0640E+00
indicating that the time between the vertical bar cursors is 1.064 s.