TDS5000B Online Programmer Guide
-- 1 9 9 --
DIAg:ITEM:NAMe?
Description
This query--only command returns the name of the selected menu item.
This command is equivalent to selecting Instrument Diagnostics from
the Utilities menu and then reviewing the Subsystem, Area and Test
settings.
This query--only command can be issued while diagnostics are still in
progress.
Group
Diagnostics
Related Commands
DIAg:ITEM?, DIAg:ITEM:FAILURES?, DIAg:ITEM:RESULT?,
DIAg:ITEM:SUBITEMS?
Syntax
DIAg:ITEM:NAMe? <NR1>
Arguments
H <NR1>
This sets the index item about which data will be returned, which
ranges from 0 through 15.
Example
DIAg:ITEM:NAMe? 2
This query might return
:DIAG:ITEM:NAME 2,”Acquisition”
This indicates that the selected menu item (2) is Acquisition.
To Next Page
Loading...
