Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 1 6 6 --
CURSor:XY:RADIUS<x>?
Description
This query--only command returns the radius of the specified cursor
when the CURSor:XY:READOUT is set to POLARCoord. The cursor
is specified by x, which can be 1 or 2.
Note: This query is only valid when the CURSor:XY:READOUT is
set to POLARCoord. If the readout is set other than polar coordinates,
the IEEE representation of NAN (Not a Number) is returned:
99.1000E+36.
Group
Cursor
Syntax
CURSor:XY:RADIUS<x>?
Example
CURSor:XY:RADIUS2?
This query might return
:CURSOR:XY:RADIUS2 4.9600
indicating that the Cursor 2 radius is 4.9600 V.