Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 1 7 1 --
CURSor:XY:RECTX<x>
Description
This command sets or queries the X cursor position in rectangular coor-
dinates. The cursor is specified by x, which can be 1 or 2.
Note: This query is only valid when the CURSor:XY:READOUT is
set to RECTangular. If the readout is set other than rectangular coordi-
nates, the IEEE representation of NAN (Not a Number) is returned:
99.1000E+36.
Group
Cursor
Syntax 1
CURSor:XY:RECTX<x> {<NR3>}
Syntax 2
CURSor:XY:RECTX<x>?
Arguments
H <NR3>
This is the X position of the specified cursor in rectangular coordi-
nates.
Example 1
CURSor:XY:RECTX2 5.04
This command sets the X position of Cursor 2 to 5.04 V in rectangular
coordinates.
Example 2
CURSor:XY:RECTX1?
This query might return
:CURSOR:XY:RECTX1 5.1200
indicating that the X postion of Cursor 1 is set to 5.1200 in rectangular
coordinates.