Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 8 8 --
ACQuire:STOPAfter
Description
This command sets or queries whether the instrument continually ac-
quires acquisitions or acquires a single sequence. This command is
equivalent to pressing SINGLE from the front panel.
Group
Acquisition
Related Commands
ACQuire:STATE
Syntax 1
ACQuire:STOPAfter {RUNSTop|SEQuence}
Syntax 2
ACQuire:STOPAfter?
Arguments
H RUNSTop
Specifies that the instrument will continually acquire data, if AC-
Quire:STATE is turned on.
H SEQuence
Specifies that the next acquisition will be a single--sequence acquisi-
tion.
Example 1
ACQuire:STOPAfter RUNSTOP
This command sets the instrument to continually acquire data.
Example 2
ACQuire:STOPAfter?
This query might return
:ACQUIRE:STOPAFTER SEQUENCE
indicating that the next acquisition the instrument makes will be of the
single--sequence type.

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English