Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 6 1 5 --
MEASUrement?
Description
This query--only command returns all measurement parameters in the
following order: MEAS1, MEAS2, MEAS3, MEAS4, MEAS5,
MEAS6, MEAS7, MEAS8, and IMMED.
Group
Measurement
Syntax
MEASUrement?
Example
MEASUrement?
This query might return
:MEASUREMENT:GATING OFF;IMMED:TYPE UNDE-
FINED;UNITS ”V”;SOURCE1 CH1;SOURCE2
CH1;SOURCE1:SIGTYPE PULSE;:MEA-
SUREMENT:IMMED:SOURCE2:SIGTYPE PULSE;:MEA-
SUREMENT:IMMED:DELAY:EDGE1 RISE;EDGE2 RISE;DI-
RECTION
FORWARDS;:MEASUREMENT:IMMED:REFLEVEL:METHOD
PERCENT;ABSOLUTE:HIGH 0.0000;LOW 0.0000;MID1
0.0000;MID2 0.0000;:MEASUREMENT:IMMED:REFLE-
VEL:PERCENT:HIGH 90.0000;LOW 10.0000;MID1
50.0000;MID2 50.0000;:MEASUREMENT:IMMED:METHOD
HISTOGRAM;NOISE HIGH;:MEASUREMENT:MEAS1:STATE
0;TYPE UNDEFINED;UNITS ”V”;SOURCE1 CH1;SOURCE2
CH1;SOURCE1:SIGTYPE PULSE;:MEA-
SUREMENT:MEAS1:SOURCE2:SIGTYPE PULSE;:MEA-
SUREMENT:MEAS1:DELAY:EDGE1 RISE;EDGE2 RISE;DI-
RECTION
FORWARDS;:MEASUREMENT:MEAS1:REFLEVEL:METHOD
PERCENT;ABSOLUTE:HIGH 0.0000;LOW 0.0000;MID1
0.0000;MID2 0.0000;:MEASUREMENT:MEAS1:REFLE-
VEL:PERCENT:HIGH 90.0000;LOW 10.0000;MID1
50.0000;MID2 50.0000;:MEASUREMENT:MEAS1:METHOD
HISTOGRAM;NOISE HIGH;:MEASUREMENT:MEAS2:STATE
0;TYPE UNDEFINED;UNITS ”V”;SOURCE1 CH1;SOURCE2
CH1;SOURCE1:SIGTYPE PULSE;:MEA-
SUREMENT:MEAS2:SOURCE2:SIGTYPE PULSE;:MEA-
SUREMENT:MEAS2:DELAY:EDGE1 RISE;EDGE2 RISE;DI-
RECTION...