TDS5000B Online Programmer Guide
-- 3 4 1 --
HORizontal:FASTframe:SELECTED:<wfm>
Description
This command sets or returns the FastFrame Selected frame number on
the specified waveform. This is equivalent to selecting FastFrame Setup
from the Horiz/Acq menu, and then choosing the waveform source and
frame. Valid waveforms include CH<x>, MATH<x> and REF<x>. The
x variable can be expressed as an integer ranging from 1 through 4 for
4--channel models and 1 to 2 for 2--channel models.
Group
Horizontal
Related Commands
HORizontal:FASTframe:TRACk, HORizontal:FASTframe:TIME-
stamp:DELTa:<wfm>?, HORizontal:FASTframe:TIMEstamp:REF?
Syntax 1
HORizontal:FASTframe:SELECTED:<wfm> <NR1>
Syntax 2
HORizontal:FASTframe:SELECTED?
Argument
H <NR1>
This specifies the selected frame number on the specified waveform.
Example 1
HORIZONTAL:FASTFRAME:SELECTED:CH2 33
This command sets the FastFrame Selected frame number on channel 2
to 33.
Example 2
HORIZONTAL:FASTFRAME:SELECTED:CH4?
This query might return
:HORIZONTAL:FASTFRAME:SELECTED:CH4 25
This indicates that the FastFrame frame number on channel 4 is set to
25.
Example 3
HORIZONTAL:FASTFRAME:SELECTED?
This query might return
:HORIZONTAL:FASTFRAME:SELECTED:CH1 2; CH2 2;
CH3 2; CH4 2; MATH1 2; MATH2 2; MATH3 2; MATH4
2; REF1 8; REF2 8; REF3 8; REF4 8
This indicates all waveforms’ Fastframe selected frame numbers.
To Next Page
Loading...
Need help?
General
