Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 4 3 9 --
MASK:MASKPRE:HTRIGPOS
Description
This command sets or returns the nominal trigger position.(pulse lead-
ing edge) used to draw the mask as a fraction of the display width. The
query form of this command returns the nominal trigger position of the
displayed mask. The set form of this command only affects the current
(displayed) mask.
Group
Mask
Related Commands
MASK:MASKPRE:HSCAle?
Syntax 1
MASK:MASKPRE:HTRIGPOS <NR3>
Syntax 2
MASK:MASKPRE:HTRIGPOS?
Argument
H <NR3>
Is a floating point number in the range of 0.0 to 1.0 that sets the trig-
ger points as a fraction of the display width, referenced from the left
edge of the graticule.
0.0 represents the left edge.
Example
MASK:MASKPRE:HTRIGPOS 0.6
Sets the current mask nominal pulse leading edge position to the 6
th
horizontal graticule division.

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English