Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 6 9 8 --
TRIGger:A:LOGIc:SETHold:HOLDTime
Description
This command sets or queries the hold time for setup and hold violation
triggering. This command is equivalent to selecting Setup/Hold Setup
from the Trig menu and then setting the desired Hold Time.
Group
Trigger
Related Commands
TRIGger:A:LOGIc:SETHold:SETTime
Syntax 1
TRIGger:A:LOGIc:SETHold:HOLDTime <NR3>
Syntax 2
TRIGger:A:LOGIc:SETHold:HOLDTime?
Argument
H <NR3>
This specifies the hold time setting in seconds. Positive values for
hold time occur after the clock edge. Negative values occur before the
clock edge.
Example 1
TRIGger:A:LOGIc:SETHold:HOLDTime?
This query might return
:TRIGGER:A:LOGIC:SETHOLD:HOLDTIME 2.0000E-09
indicating that the current hold time for the setup and hold trigger is 2
ns.
Example 2
TRIGger:A:LOGIc:SETHold:HOLDTime 3.0E-3
This command sets the hold time for the setup and hold trigger to 3 ms.

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English