Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 8 0 6 --
WFMInpre:XINcr
Description
This command sets or queries the horizontal interval between incoming
waveform points in units specified by WFMInpre:XUNit.
Group
Waveform Transfer
Related Commands
WFMInpre:XUNit, WFMOutpre:XINcr
Syntax 1
WFMInpre:XINcr <NR3>
Syntax 2
WFMInpre:XINcr?
Argument
H <NR3>
This is the horizontal interval representation.
Example 1
WFMInpre:XINcr?
This query might return
:WFMINPRE:XINCR 1.0000E-3
indicating that if WFMInpre:XUNit is set to ”s”, there is a 1 ms interval
between incoming waveform points.
Example 2
WFMInpre:XINcr 3E-3
This command sets the interval between Incoming waveform points to
3ms.