Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 2 1 8 --
DISplay:CLOCk
Description
This command sets or queries the display of the date and time. This is
equivalent to selecting Display Date & Time from the Display menu.
The query form of this command returns an ON (1) or an OFF (0).
Group
Display Control
Related Commands
DATe, TIMe
Syntax 1
DISplay:CLOCk {ON|OFF|<NR1>}
Syntax 2
DISplay:CLOCk?
Arguments
H ON
This enables display of date and time.
H OFF
This disables display of date and time.
H <NR1>
A 0 disables display of date and time; any other value enables display
of date and time.
Example 1
DISplay:CLOCk ON
This command enables display of date and time.
Example 2
DISplay:CLOCk?
This query might return
:DISPLAY:CLOCK 1
This indicates that the display of date and time is currently enabled.