Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 7 3 2 --
TRIGger:A:PULse:TRANsition:DELTATime
Description
This command sets or queries the delta time used in calculating the
transition value for the transition trigger. This is equivalent to selecting
Transition Setup from the Trig menu and setting the Time.
Group
Trigger
Related Commands
TRIGger:A:PULse:TRANsition:POLarity, TRIGger:A:PULse:TRAN-
sition:THReshold?
Syntax 1
TRIGger:A:PULse:TRANsition:DELTATime <NR3>
Syntax 2
TRIGger:A:PULse:TRANsition:DELTATime?
Argument
H <NR3>
This specifies the delta time, in seconds.
Example 1
TRIGger:A:PULse:TRANsition:DELTATime?
This query might return
:TRIGGER:A:PULSE:TRANSITION:DELTATIME
2.0000E-09
indicating that the delta time of the transition trigger is set to 2 ns.
Example 2
TRIGger:A:PULse:TRANsition:DELTATime 15E-6
This command sets the delta time of the transition trigger to 15 µs.