Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 6 5 8 --
TRIGger:A:COMMunication:CLOCk:POLarity
(Option SM Only)
Description
This command sets or queries the communication clock polarity
Group
Trigger
Syntax 1
TRIGger:A:COMMunication:CLOCk:POLarity
(RISe|FALL}
Syntax 2
TRIGger:A:COMMunication:CLOCk:POLarity?
Arguments
H RISe
Specifies to trigger on the rising or positive edge of a signal.
H FALL
Specifies to trigger on the falling or negative edge of a signal.
Example 1
TRIGger:A:COMMunication:CLOCk:POLarity RISE
This command sets RISE as the clock polarity.
Example 2
TRIGger:A:COMMunication:CLOCk:POLarity?
This query might return
:TRIGGER:A:COMMUNICATION:CLOCK:POLARITY RISE
indicating that the polarity is to trigger on the rising edge of the clock.