Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 8 5 0 --
ZOOm:ZOOM<x>:STATE
Description
This command sets or queries the specified zoom on or off, where x is
an integer from 1 to 4 representing the desired zoom window.
Default is Zoom1 on, Zoom2 -- 4 off.
Group
Zoom
Syntax 1
ZOOm:ZOOM<x>:STATE {ON|OFF|<NR1>}
Syntax 2
ZOOm:ZOOM<x>:STATE?
Arguments
H ON
Turns Zoom 1--4 on.
H OFF
Turns Zoom 1--4 off.
H <NR1>
A 0 disables the specified zoom; any other value enables the specified
zoom.
Example 1
ZOOm:ZOOM1:STATE ON
This command turns Zoom1 on.
Example 2
ZOOm:ZOOM1:STATE?
This query might return
:ZOOM:ZOOM2:STATE 1
indicating that Zoom2 is on.