TDS5000B Online Programmer Guide
-- 2 1 7 --
DIAg:STOP
Description
This command (no query form) causes diagnostics (or test) execution to
terminate at the end of the next low--level test. This command is equiv-
alent to selecting Instrument Diagnostics from the Utilities menu and
then clicking Abort.
Group
Diagnostics
Related Commands
TEST:STOP
Syntax
DIAg:STOP
Example
DIAg:STOP
This command terminates diagnostics (or test) execution at the end of
the next low--level test.
To Next Page
Loading...
