Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 1 5 7 --
CURSor:WAVEform:HPOS<x>?
Description
This query--only command returns the position of the specified wave-
form cursor. The cursor is specified by x, which can be 1 or 2. This cor-
responds to the v1 or v2 (cursor 1 or cursor 2) cursor readout.
Group
Cursor
Syntax
CURSor:WAVEform:HPOS<x>?
Example
CURSor:WAVEform:HPOS1?
This query might return
:CURSOR:WAVEFORM:HPOS2 0.247344970703
indicating that cursor 2 is at 247.3 mV with respect to ground on the
source waveform.