TDS5000B Online Programmer Guide
-- 3 4 4 --
HORizontal:FASTframe:TIMEStamp:ALL:<wfm>?
Description
This query--only command returns the frame number and time stamp
for each frame between requested frames, inclusive, within the speci-
fied waveform. Argument order is unimportant. Valid waveforms in-
clude CH<x>, MATH<x> and REF<x>. The x variable can be ex-
pressed as an integer ranging from 1 through 4 for 4--channel models
and 1 to 2 for 2--channel models.
The format of the output is as follows:
DD MON YYYY HH:MM:SS.xxx xxx xxx xxx
H DD MON YYYY is day, month, and year
H HH:MM:SS is hours, minutes, and seconds
H .xxx xxx xxx xxx is fractions of a second to picoseconds
Group
Horizontal
Syntax
HORizontal:FASTframe:TIMEStamp:ALL:<wfm>?
<NR1>, <NR1>
Arguments
H <NR1>
This specifies the selected ”from” frame number within the specified
waveform.
H <NR1>
This specifies the selected ”to” frame number within the specified
waveform.
Example
HORizontal:FASTframe:TIMEStamp:ALL:CH2? 4,1
This query might return
:HORIZONTAL:FASTFRAME:TIMESTAMP:ALL:CH1
4,1,”02 Mar 2000 20:10:54.542 037 272 620”
This is the list of time stamps from frame 1 through frame 4 on channel
1.
To Next Page
Loading...
Need help?
General
