Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 7 1 3 --
TRIGger:A:PULse:GLItch:WIDth
Description
This command sets or queries the width for the A glitch trigger. This
command is equivalent to selecting Glitch Setup from the Trig menu
and then setting the desired Width.
For information about using the width value, refer to the TRIG-
ger:A:PULse:GLItch:TRIGIF command.
Group
Trigger
Related Commands
TRIGger:A:LEVel, TRIGger:A:PULse:GLItch:TRIGIF
Syntax 1
TRIGger:A:PULse:GLItch:WIDth <NR3>
Syntax 2
TRIGger:A:PULse:GLItch:WIDth?
Argument
H <NR3>
This argument specifies the width of the glitch in seconds.
Example 1
TRIGger:A:PULse:GLItch:WIDth?
This query might return
:TRIGGER:A:PULSE:GLITCH:WIDTH 2.0000E-09
indicating that the width of the glitch is currently set at 2 ns.
Example 2
TRIGger:A:PULse:GLItch:WIDth 15E-6
This command sets the width of the glitch to 15 µs.

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English