Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 6 6 0 --
TRIGger:A:COMMunication:CODe
(Option SM Only)
Description
This command sets or queries the signal code that the communications
trigger should expect on the incoming signal.
Group
Trigger
Syntax 1
TRIGger:A:COMMunication:CODe
{AMI|HDB3|B3ZS|B6ZS|B8ZS|CMI|NRZ|MLT3|MANChes-
ter}
Syntax 2
TRIGger:A:COMMunication:CODe?
Arguments
H AMI
H HDB3
H B3ZS
H B6ZS
H B8ZS
H CMI
H NRZ
H MLT3
H MANChester
Example 1
TRIGger:A:COMMunication:CODe AMI
This command selects
AMI as the line code that the communications
trigger expects on the incoming signal.
Example 2
TRIGger:A:COMMunication:CODe?
This query might return
:TRIGGER:A:COMMUNICATION:CODE AMI
indicating that the code is AMI.