TDS5000B Online Programmer Guide
-- 1 2 7 --
CH<x>:PRObe:ID:TYPe?
Description
This query--only command returns the type of probe that is attached to
the specified channel. The channel is specified by x. The value of x can
range from 1 through 4 for four --channel instruments or 1 through 2 for
two--channel instruments. Level 2 (or higher) probes supply their exact
product nomenclature; for Level 0 or 1 probes, a generic ’type string’ of
”nnX” is returned.
Group
Vertical
Syntax
CH<x>:PRObe:ID:TYPe?
Example
CH1:PRObe:ID:TYPe?
This query might return
:CH1:PROBE:ID:TYPE ”P6203”
indicating that P6203--type probe is attached to channel 1.
To Next Page
Loading...
