Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 3 9 5 --
LIMit:TEMPlate:STORe
Description
This command (no query form) saves the specified source waveform to
the specified reference or file name.
Group
Limit Test
Related Commands
Syntax
LIMit:TEMPLate:STORe <wfm>,{REF<x>|<file
path>}
Arguments
H <wfm>
This argument specifies the waveform that will be saved as the tem-
plate. The source of the waveform can be CH<x> (where x is 1
through 4 for four channel instruments or 1 through 2 for two channel
instruments), MATH<x>, or Ref<x> (where x is 1 through 4).
H REF<x
This argument specifies a reference location in which the template
waveform will be stored. The reference waveform specified by x,
which can be 1 through 4
H <file path>
This argument specifies a file path where the template waveform will
be stored. This argument is a quoted string.
Example 1
LIMit:TEMPlate:STORe CH2,REF1
This command creates a template reference waveform, REF1, using
CH2 as its source
Example 2
LIMit:TEMPLate:STORe CH1,”template.wfm”
This command creates a template reference waveform, template.wfm,
using CH1 as the source.