TDS5000B Online Programmer Guide
-- 2 3 8 --
DISplay:GRATicule
Description
This command selects or queries the type of graticule that is displayed.
This command is equivalent to selecting Graticule Style from the Dis-
play menu.
Group
Display Control
Syntax 1
DISplay:GRAticule {CROSS-
Hair|FRAme|FULl|GRId|IRE|NTSC|MV|PAL}
Syntax 2
DISplay:GRAticule?
Arguments
H CROSSHair
This specifies a frame and cross hairs.
H FRAme
This specifies a frame only.
H FULl
This specifies a frame, a grid and cross hairs.
H GRId
This specifies a frame and grid only.
H IRE
This specifies an IRE video graticule, and sets the vertical scale to
143 mV per division.
H NTSC
This specifies an INTSC video graticule (same as the IRE graticule),
and sets the vertical scale to 143 mV per division.
H MV
This specifies an mV video graticule and sets the vertical scale to 143
mV per division. This graticule is used to measure PAL standard vid-
eo signals.
H PAL
This specifies a PAL video graticule (same as the mV graticule) and
sets the vertical scale to 143 mV per division. This graticule is used
to measure PAL standard video signals.
To Next Page
Loading...
Need help?
General
