TDS5000B Online Programmer Guide
-- 1 2 8 --
CH<x>:PRObe:ID?
Description
This query--only command returns the type and serial of the probe that
is attached to the specified channel. The channel is specified by x. The
value of x can range from 1 through 4 for four--channel instruments or
1 through 2 for two --channel instruments.
Group
Vertical
Syntax
CH<x>:PRObe:ID?
Example
CH2:PRObe:ID?
This query might return
:CH2:PROBE:ID:TYPE ”10X”;SERNUMBER ”N/A”
indicating that a passive 10x probe of unknown serial number is at-
tached to channel 2.
To Next Page
Loading...
