TDS5000B Online Programmer Guide
-- 4 2 5 --
MASK:COUNt:STATE
Description
Sets or returns the mask hits count state. In other words, it controls
whether or not mask counting is being done. MASK:DISplay must be
ON to enable MASK:COUNt:STATE to count mask violations.
Group
Mask
Syntax
MASK:COUNt:STATE {OFF|ON|<NR1>}
Arguments
H ON
Turns on mask counting.
H OFF
Turns off mask counting. This is the default state.
H <NR1>
A 0 turns off mask hit counting, and other values turn on mask hit
counting.
Example
MASK:COUNT:STATE ON
Turns on mask hit counting
To Next Page
Loading...
