TDS5000B Online Programmer Guide
-- 2 1 5 --
DIAg:SELect:TEST
Description
This command (no query form) selects one of the available tests. This
command is equivalent to selecting Instrument Diagnostics from the
Utilities menu and then choosing a Test from the drop--down list.
Note: This command should be executed only if DIAg:LEVEL is
currently set to TEST.
Group
Diagnostics
Related Commands
DIAg:SELect:AREA, DIAg:SELect:LAST, DIAg:SELect:SUBSYS
Syntax
DIAg:SELect:TEST <NR1>
Arguments
H <NR1>
This selects a test by number, which can range from 0 (zero selects
ALL) through 15 (as specified by DIAg:NUMITEMS).
Example
DIAg:SELect:TEST 1
This command selects Test 1 as the test to be executed.
To Next Page
Loading...
