Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 4 8 8 --
MASK:USER:PATTERNBITS
Description
This command sets or returns the number of bits used for serial trigger
for the User mask standard. For example, DS1 requires six bits,: four
leading zeros, a one, and a trailing zero. The query form of this com-
mand returns the serial bit value of the displayed mask. The set form of
this command only affects the User mask, regardless of the current (dis-
played) mask.
Group
Mask
Related Commands
MASK:USER:PRESAMPBITS
Syntax 1
MASK:USER:PATTERNBITS <NR1>
Syntax 2
MASK:USER:PATTERNBITS?
Argument
H <NR1>
Is an integer that sets the number of bits.
Example
MASK:USER:PATTERNBITS 6
Sets the User mask number of serial pattern bits to 6.