Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 2 5 5 --
DISplay:SHOWREmote
Description
This command sets or queries the state of the remote display feature
and is equivalent to selecting Display Remote from the Display menu.
The query form of this command returns ON (1) or OFF (0).
This feature allows you to view waveforms and other graticule data on
a remote display using remote control software like VNC (Virtual Net-
work Computing) or Symantec pcAnywhere.
Group
Display Control
Syntax 1
DISplay:SHOWREmote {ON|OFF|NR1}
Syntax 2
DISplay:SHOWREmote?
Arguments
H ON
This enables the remote display of waveform and other graticule data.
H OFF
This disables the remote display of waveform and other graticule data.
H NR1
A 0 disables remote display of waveform and other graticule data; any
other value enables remote display of waveform and other graticule
data.
Example 1
DISplay:SHOWREmote ON
This command enables remote display of waveform and other graticule
data.
Example 2
DISplay:SHOWREmote?
This query might return:
:DISPLAY:SHOWREMOTE 1
This indicates that the remote display of waveform and other graticule
data is currently enabled.

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English