TDS5000B Online Programmer Guide
-- 2 1 2 --
DIAg:SELect:AREA
Description
This command (no query form) selects one of the available areas. This
command is equivalent to selecting Instrument Diagnostics from the
Utilities menu and then selecting an Area from the pull--down list.
Note: This command should be executed only if DIAg:LEVEL is
currently set to AREA.
Group
Diagnostics
Related Commands
DIAg:SELect:SUBSYS, DIAg:SELect:TEST, DIAg:SELect:LAST
Syntax
DIAg:SELect:AREA <NR1>
Argument
H <NR1>
This selects an area by number, which can range from 0 (zero selects
all) through 15 (as specified by DIAg:NUMITEMS).
Example
DIAg:SELect:AREA 1
This command selects Area 1 as the area to be diagnosed.
To Next Page
Loading...
Need help?
General
