Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 7 8 7 --
TRIGger:B:STATE
Description
This command sets or queries the state of B trigger activity. If the B
trigger state is on, the B trigger is part of the triggering sequence. If the
B trigger state is off, then only the A trigger causes the trigger event.
Group
Trigger
Related Commands
TRIGger:A:MODe
Syntax 1
TRIGger:B:STATE {ON|OFF|<NR1>}
Syntax 2
TRIGger:B:STATE?
Arguments
H ON
This argument indicates that the B trigger is active and in causes trig-
ger events conjunction with the A trigger.
H OFF
This argument indicates that only the A trigger causes trigger events.
H <NR1>
A 0 turns off the B trigger; any other value activates the B trigger.
Example 1
TRIGger:B:STATE?
This query might return
:TRIGGER:B:STATE 0
indicating that the B trigger is inactive and that only the A trigger
causes trigger events.
Example 2
TRIGger:B:STATE ON
This command sets the B trigger to active, making it capable of causing
trigger events.